Forklift Instructor Course : ITSSAR : Cheshire :Phone 01270 505 824

DAILY CHECK BOOK. FREE COPY....

Warehouse
COURSES AVAILABLE
Forklift
Reach Truck
Powered P Truck
Hand P Truck
Refreshers (All kinds)
RELATED ATTACHMENT COURSES
Attachments: Barrel
Cage
SPECALIST EQUIPMENT COURSES
SCISSOR LIFT

Construction
Mini Digger
Dumper
Slinger/Signaller
all other types

Short Courses
Lorry Loader (HIAB)

ADDITIONAL INFO
On-site Training
Who we train

Our own pages

We use 1st Directory

Lorry Loader Training Click Here	Thomas Truck Training Ltd Offices in ........ The Potteries and The Midlands	The Potteries PHONE +44 (0) 1270 505824 The Midlands PHONE +44 (0) 1832 731261 or 0800 118 2201 Freephone
	MINI DIGGER OPERATORS COURSE from £350 Lorry Loader Courses at your site £120 per candidate ( Including regestration Fee)

Instructor Training & Re-register Courses to
ITSSAR Training standard

Instructor Courses 10 day novice Instructor course 4/5 day Instructor re-registration 5 day direct entry 5 day Method of Instruction In-house Instructor		Thomas Truck Training ltd is accredited under the Independent Training Standards Scheme and Register (ITSSAR) to arrange and deliver professional Instructor training at a training centre in Cheshire. Upon successful completion of the course candidates will be able to provide effective instruction on the following: Relevant instructional skills, including classroom techniques Techniques for structuring training material into logical sequence An objective and critical approach towards the effectiveness of the instruction presented Appropriate methods of assessment on the progress of trainees and the testing of basic skills and knowledge they acquire; Must hold recognised accredited forklift operator certification no older than 5 years prior to the course commencement. Course monitored by ITSSAR, and operated under continual assessment. Making certain that you have to achieve every day to gain your instructors ticket. entered on the ITSSAR national register This qualification is valid for 5 years..
We have organised a choice of B&B ranging in the region of £25-£40 per night To make an enquiry you can use the enquiry service or just E mail me on Bigh@3ttt.info or why not just ring me on 01832 731261 any reasonable time
Further FLT Instructor Development (After initial training) Introduction It has become noticeable, that upon successful conclusion of an Instructor Training Course, many recently qualified Instructors need further help to commence delivering Training Courses. TTT ltd have identified three areas within which newly qualified instructors or their employers may benefit from further assistance. Delivery of Practical Courses Setting up and putting into place Course work and records Safe FLT working systems to ensure compliance with Legislation What we can do to help TTT ltd can offer an Instructor Development Programme aimed at recently qualified or existing FLT Instructors, enabling them to deliver FLT training, compliant with the requirements of the Approved Code of Practice (L117). There is an indicial set up fee of £200 Which will give all the information required to successfully conduct FLT training at your site and will include any videos and individual training aids as required. As well as individual set up of In-House certificates and back up paperwork with manual record keeping that could be transferred to computer. How it is done The opportunity for an Instructor to shadow one of our team over a relevant FLT course of 1,3 or 5 days duration. (This would be on-site). Attendance by the course tutor for the full duration of the 1^st course on your site. Enhancing the varied elements undertaken on the course and assisting the company to ensure correct procedures are used and records are kept. At a cost of £175 per day. Training Package: containing:- Ø All relevant course material, i.e. Test Sheets, Theory Papers. Training record sheets & Instructor/Company Guidance Notes. Ø PowerPoint presentations for Health & Safety. Ø Candidate course notes and course handout.
Instructor Qualities A good Instructor will need to adopt an enthusiastic approach to every lesson, will thoroughly research the subject matter, simplify the difficult areas to be taught and set a good example by a confident attitude and a fair, firm, but friendly approach to the trainee operators and will always endeavour to see each problem through the eyes of the individual members of the course. This should be borne in mind when selecting potential instructors.

ADDITIONAL INFORMATION

COURSE CONTENT:

Truck Familiarisation and Testing

Health & Safety at Work Act

Approved Code of Practice

Setting up and conducting Skills tests

Analysing test results

Basic report writing

Certification and Authorisation

Qualities of a Good Instructor

Principles of Instruction-

Preparation and Planning
Motivation
Confirmation,

Task Analysis and Planning Lessons

Practical lessons

Selection and use of visual aids

Classroom Lessons

Question and answer technique

TRAINING METHODS
The course is highly participative and candidates will be expected to take part in all activities as the award of the qualification is based mainly on assessed performance. Throughout the course the candidates' progress will be assessed and he/she will receive regular feedback.

QUALITY
Our Course tutor is a very experienced industrial trainer who has successfully trained many new instructors to the standards required by ITSSAR and other accrediting bodies.

To gain the qualification the candidate must pass 8 examinations-

1,2+3 Knowledge examinations based on the course content.
4. Conduct a classroom lesson
5. Conduct a practical demonstration
6. Conduct a practical lesson
7. Construct and conduct a practical test
8. Write an end of course report

These examinations are scheduled at various stages during the course and time is available for further practice and retakes if necessary.

All examinations are assessed by the course tutor and during the course the tutor will be monitored by an ITSSAR monitor to ensure the necessary standards are being met.

Entry Qualifications.
All candidates must be experienced operators and must hold an operators certificate issued by a registered Instructor within the twelve months preceding the course.
We are able to offer advice regarding the selection of suitable candidates and carry out the necessary pre course testing if required.

In House Courses

These courses are normally attended by prospective, or established in company instructors that will only be instructing for their sponsor company

Successful candidates from this course can instruct, examine and issue certification within their sponsor company sites only. The instructor certification remains with the sponsor company and once the instructor ceases employment he / she cannot continue as an instructor. Any certification issued by the in company instructor, to employees, remains with the sponsor company and is not transferable if employees leave the sponsor company’s employ.

Certification is issued for 5 years and instructors must then attend a recognised re-registration course to continue training.

These courses would normally be undertaken at the company’s site encompassing the company’s equipment, operating environment, systems and policies. We are also able to offer these courses at a training centre if required.

For the more Specific Technical Details Please click Here

Click on a pick to make it bigger.

Hit Counter

Further FLT Instructor Development (After initial training)

What we can do to help